1、濟南專業防水http://www.zh-echi.com.cn/提醒應該先關閉漏水管道的閥門，暫時停止漏水。打磨除銹漏水點，清洗干凈用吹風機吹干。
Jinan professional waterproof remind should first close the valve leaking pipes, temporarily stopped leaking. Polished rust leakage points, cleaned with a hair dryer.

2、找5毫米厚的一塊廢橡膠塊，并且單面用粗砂紙打磨一遍。分別在漏水處和打磨過的橡膠面上涂膠水。
Looking for a 5 mm thick waste rubber blocks, and again sided with coarse sandpaper. Respectively leaks and polished rubber surface coating of water.

3、待膠水不粘手，將橡膠塊貼到漏水處，用橡膠錘或木棒敲擊橡膠塊使之緊緊粘牢。用金屬卡箍將橡膠塊緊緊的箍在水管上。
Be sticky glue, rubber blocks attached to leaks, tapping rubber block with a rubber mallet or stick closely to make cement. The rubber block with a metal clamp on the pipe tightly hoop.

4、濟南專業防水http://www.zh-echi.com.cn/介紹用木塊壓在橡膠塊上用鐵絲緊緊的綁在水管上。金屬卡環在賣橡膠管道的地方可以買到，擰螺絲的那種，水壓不大的情況下，一定能夠保證不再漏水。
Jinan professional waterproof description is pressed on the rubber block of wood with wire tightly tied to the pipes. Metal clasp on sale where you can buy a rubber pipe, tighten that screw, under pressure is not the case, we can ensure that no leakage.